Required *

Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

Request a quote Make an offer

Extron VGA DA (6 way)

Daily Rate £25.00

The Extron P/2 DA6 is a one input VGA–UXGA distribution amplifiers that split a signal and distribute it to four or six separate outputs. With 300 MHz (-3dB) of video bandwidth, the P/2 DA4 Plus and P/2 DA6 Plus are capable of driving any VGA–UXGA computer signal up to 250 feet (76 meters) using Extron high resolution VGA cable. Each output is individually buffered and amplified to help maintain the original signal integrity and eliminate noise interference. The P/2 DA4 Plus and P/2 DA6 Plus are also compatible with a variety of data displays and include a video gain switch for long cable runs.

Gain 0.7V or 1.0V, switchable
Bandwidth 300 MHz (-3dB), fully loaded
Video input
Number/signal type 1 VGA-UXGA: RGBHV, RGBS, RGsB, RsGsBs
Connectors (1) 15-pin HD female (optional Mac/VGA adapters are available)
Nominal level 0.7V p-p for RGB
Minimum/maximum levels Analog: 0.3V to 1.5V p-p with no offset at unity gain
Impedance 75 ohms
Horizontal frequency 15 kHz to 135 kHz
Vertical frequency 30 Hz to 150 Hz
Return loss <-45dB @ 5 MHz
Video output
Number/signal type P/2 DA4 PLUS: 4 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs
Connectors (4 or 6) 15-pin HD female (depending on the model)
Minimum/maximum levels 0.3V to 1.5V p-p
Nominal level 0.7V p-p for RGB
Impedance 75 ohms
Return loss <-45dB @ 5 MHz
DC offset ±5mV maximum with input at 0 offset
Input type RGBHV, RGBS, RGsB, RsGsBs
Output type RGBHV, RGBS, RGsB, RsGsBs
Input level (min./max.) 3.0V to 5.0V p-p
Output level TTL: 5.0V p-p, unterminated
Input impedance 510 ohms
Output impedance 75 ohms
Max. propagation delay 60 ns
Max. rise/fall time 2 ns
Polarity Positive or negative
Power 100VAC to 240VAC, 50/60 Hz, 12 watts, internal, autoswitchable
Temperature/humidity Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount Yes, with optional 1U rack shelf, part #60-190-01
Enclosure type Metal
Enclosure dimensions 1.6" H x 8.7" W x 9.4" D: (1U high, half rack width)
4.1 cm H x 22.1 cm W x 23.9 cm D
(Depth excludes connectors.)
Product weight 2.2 lbs (1.0 kg)
Shipping weight
P/2 DA4 PLUS 4 lbs (2 kg)
P/2 DA6 PLUS 5 lbs (3 kg)
Vibration ISTA/NSTA 1A in carton (International Safe Transit Association)
Listings UL, CUL
Compliances CE
MTBF 30,000 hours